Currently stationed in a top-tier facility in South Korea, these machines have been maintained under strict operational standards and remain in excellent working order. Acquiring these authentic Japanese Murata units through Hangyue Tex is a highly strategic investment for your spinning mill. Bypassing the extreme wait times and capital expenditure of new air-jet spinning equipment allows your factory to scale up its premium yarn offerings immediately. As your trusted partner in global textile machinery exports, Hangyue Tex ensures that these high-speed vortex machines are meticulously vetted, documented, and fully ready for global export. Integrating the Murata MVS861 into your floor guarantees an instant boost to both your production capacity and your competitive edge, delivering a rapid return on investment.

Number of spindle for synthetic yarn :
1.0 pi-60
1.1 pi-230
1.2 pi-80
1.3 pi-150
Needle Holder -110
N1 nozzle -170
N1 crown nozzle-150
N2 nozzle-80

Number of crown spindle for 100% cotton or cotton rich blended yarn :
1.1 pi-90
1.2 pi-170
1.4 pi-80
1.5 pi-70

Note : For 100% cotton, recommend purchasing 80 needle holders and 80 clearer sensors (machines have not been run on 100% cotton).

S twist :
1 set of N1 nozzle attached with needle holder-80
N1 nozzle-80
Needle holder-80
N2 nozzle-160
Splicer-2

Spare parts list: 

Spindles/Units : 96
Material : Cotton 100%, Synthetic/Cotton, Synthetic 100%
Yarn Count Range : Ne15 to Ne60 (39 tex to 10 tex)
Fiber Length : 38 mm (1.5”) max
Sliver Weight : 70 to 35 Grain/yd (5 to 2.5 ktex)
Sliver Can Size : Ø400×H1200 mm (16”×48”) / 2 Lines; Ø450×H1200 mm (18”×48”) / 2 Lines; Ø500×H1200 mm (20”×48”) / 3 Lines; Ø600×H1200 mm (24”×48”) / 3 Lines
Unit Pitch : 235 mm
Total Installed Power (96 Units) : 27.5 kW (with 3 Splicer Carriages)
Traverse Width : 6”
Winding Shape : 0° (Parallel) / 4°20’ / 5°57’
Max Package Diameter : 300 mm
Max Package Weight : 3.2 kg (Parallel)
Splicer Carriage : Type Splicer; Max Carriage 6 Units; Cycle Time 10 sec
Auto Doffer : Doffing Cycle Time 15 sec; Traveling Speed 25 m/min
Bobbin Stocker : 160
Compressed Air (Machine Inlet) : 0.60 MPa (6.1 kgf/cm²); Dew Point 25°C max (at 0.6 MPa); Max Oil 0.07 g/m³; Air Volume Approx. 80 L/min (ANR) per nozzle @ 0.5 MPa
Frame Dimensions (96 Units) : L1 22,560 mm; L2 27,192 mm; Minimum Space Between Frames 2,000 mm
Standard Equipment : VOS III Control Panel; Spinning Sensor; MSC (Muratec Spin Clearer); Friction Roller; Yarn Length Measuring Device; Individual Inverter Drive; Vacuum Chamber with Automatic Waste Fiber Extracting; Package Conveyor; Air Pressure Control Panel
Optional : MSC-F (Foreign Fiber Detector); Waxing Device; Package Lifter; Overhead Blow Cleaner; Splice Monitor; Additional Splicer Carriage; Additional Spindle; Additional Air Piping (Crown Spindle)

Yarn Advantages (Typical Vortex Yarn) : Reduced hairiness and clear appearance; resistance to pilling and abrasion; moisture absorption and wash resistance; stability against deformation

Market Reference (Same Model/Year/Spindles) : Year 2013, 96 spindles, offered as running condition; listings commonly seen in China market

Production & Performance
Delivery / Spinning Speed: Up to 450 m/min
Independent Machine Sides: Left and right sides can operate two different yarn qualities simultaneously
Bobbin Handling: Separate tube feeder with two independent tube chains (one per side) for different yarn lots

Automation & Control
Automatic Functions:
Automatic piecing after yarn break or clearer cut
Automatic bobbin doffing (full package change)
Automatic cleaning of spinning positions and fiber fly removal
Continuous robot operation even if one robot is under maintenance
Piecing Quality:
Advanced piecing technology producing high-quality splices suitable for downstream processing

Yarn & Process Capabilities
Yarn Formation Process:
Compressed air vortex spinning system forming a core-aligned yarn structure with wrapped fibers, resulting in low hairiness and balanced strength and elongation
Yarn Characteristics:
Low hairiness
Reduced yarn faults
Good abrasion resistance
Stable high-speed production
Lower fiber fly during operation
Machine Construction & Drafting
Drafting System:
Advanced multi-roller drafting arrangement (4-over-4) for precise and gentle fiber control
Traversing System:
Patented traversing mechanism ensuring uniform sliver and yarn distribution
Extended service life of top rollers and aprons
Consistent yarn quality

Operating & Service Features
Bobbin Format:
Cylindrical yarn packages positioned beneath the machine
Winding System:
Dual contra-rotating winding units
Adjustable cross-angle
Precise yarn guidance and stable package build
Machine Operation:
Central electronic control panel for setting drafting parameters, spinning speed, and process conditions
Typical Yarn Count Range (Reference Values)
(Actual performance depends on raw material, machine configuration, and production settings)
Combed Cotton: Ne 30 – 50
Man-Made Cellulosic Fibers (Viscose / Modal): Ne 24 – 40
Blends: Cotton / Viscose, Cotton / Polyester (medium blend ratios)

These specific units come highly specified with the advanced Polimaster feature for superior fiber management and a 3-ply splicer, providing significant versatility for specialized yarn requirements. With serial numbers ranging from 21SX494440-001 to 004, these well-maintained, late-model machines are ideal for textile manufacturers looking to enhance their yarn quality with low hairiness and high pilling resistance. This is a rare chance to secure near-new Muratec Vortex technology for immediate industrial use.